1. Ir dobs skaņas iemesls, kas ir fiksēts ciets, galvenokārt vilnas dēļi un keeļi, vilnas plāksne un neliels naglu vai naglu skaits cietumā, dažreiz plāksnes dēļ, ko izraisa mitruma izmaiņas, saraušanās vai līme nav kvalificēta. mazs .
2. the main causes of uneven surface is the primary rough or ground deformation due to drum. At the time of construction, application level on the keel surface leveling, if uneven wood should be adjusted. Ventilation should be done small grooves on the keel. Plate margin wall ventilation gap of 10 mm should be Kreisais . Izolācijas materiālam jābūt sausam, lai novērstu koksnes mitrumu pēc bungas . koka grīdas virsmas plakanuma kļūdai jābūt mazākai par 1 mm .
3. šuve pie LAX, izņemot ārēju uzstādīšanu, nav standarta konstrukcijā, plāksnes platuma lieluma kļūda un slikta kvalitāte ir arī svarīgi iemesli .
4. local warping drums in addition to the main reasons the Board moisture deformation, but also hairy plate seam is too small or seamless, use, water pipe leaks, such as blisters due to wet floors. After the floor, brushing the floor paint film integrity, for daily use to prevent water from entering the floor lower, time to clean up the surface layer of water.
